Description

This listing is for (2) Wrap prints = 1 set, 1 print for each board. Boards are not included. These 3M vinyl wraps come already laminated and ready to play on after they are installed. It's idea to use heat from a blow dryer to activate the adhesive after you initially apply the wrap to the board. *Squeegee tool with felt is 4" wide. See picture. *TIP: Heat is also helpful to remove any small air pockets that may show up after you store your board for a long period of time. This may or may not occur but if it does there is a solution by using heat while working the concerned area back down. This occurs from weather fluctuations from hot to cold and cold to hot, wood getting moisture from the air and also if there is a chemical reaction from paint. It's not something that normally happens but if it does then you know what to do to fix it. Product Details: Printed on 3M Air Release High Quality Vinyl FIt Regulation size boards 24"x48". Wraps printed size 24.5" by 48.5" for ease of installation. Special Size can be requested if needed. Hole is NOT pre-cut. Wraps are digitally printed with Eco-Sol Ink. The vinyl allows you to eliminate possible bubbles during installation, by simply pressing gently on them with your finger and working them outwards. Sticky Backing is pressure sensative so please apply pressure over entire wrap after the initial installion to ensure all areas are down.